Convenient Backup for Compatible Remote Controls
The Remote Control Duplicator provides a convenient way to copy compatible wireless remotes for cars, garage doors, gates, and other supported systems.
Designed to provide a backup for compatible remotes, this device copies supported signals from your existing remote control.
The device can store up to four compatible remote buttons from the same or different supported remotes, allowing you to combine multiple functions into one compact device. Each of the matching buttons (A, B, C, and D) can be programmed with a supported remote function.
Depending on compatibility, you may be able to operate functions such as a garage door or vehicle remote from a single compact remote instead of carrying multiple compatible remotes.
The seamless infrared connection is safe and secure to use thanks to data encryption.
Stored codes are saved independently for convenient operation of programmed buttons.
- Designed for convenient code copying
- A portable keychain's design
- Supports compatible wireless remote frequencies
USE GUIDE
Holding two buttons (A and B, B and C, etc.) with both fingers at the same time will cause the LED to flash three times rapidly in about two seconds. To clear the code, release one finger (keeping the other finger on one of the buttons) and use the free finger to quickly click on the loose button three times until the LED light flashes. Then, release both fingers and press any key on the remote handle.
If the LED light stays on after hitting any remote control button, it indicates that the original code was not successfully deleted. If the light goes out, it indicates that the code was successfully cleared (all four keys are empty). Re-clearing is required, and cloning is only possible if the code
The LED light will flash twice in around two seconds when you simultaneously press the initial buttons on two remote controls. To make a copy, hold the original remote control in your left hand and our remote control duplicator in your right. Keep the two remote controls as near together as possible. The indicator light keeps flashing and lets go of your fingers after a second. After pairing successfully, which shows that the initial key code on the original remote control has been transferred to the other remote control, you can push the key to switch on the light. The same method can also be used to activate the second, third, etc. keys.
Restore: You can simultaneously press the bottom two keys if you inadvertently wipe the remote control code copy. When you press any key, the LED lights will flash quickly and release. The remote control code has been recovered while the light is long. Before using our copy, please ensure that the current code on the remote control has been deleted.
How should one respond when certain keys are in control while the others are not?
You can do clear and restore operations; the specific procedure is as follows:
first, clear the code;
After the code has been cleared, copy the failing key again; you don't need to copy the other buttons.
after which the code is cleared once more;
The original keys that were successfully cloned are retained at this stage, while the original keys that were unsuccessfully copied are now covered by new codes. The code is then wiped once more. If there isn't a copy after the second copy, keep repeating the preceding procedures until all of the keys have been successfully replicated.